This fits your .
Make sure this fits
by entering your model number.
Made by a small tool manufacturer in the Czech Republic
Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
Contains the following sizes: 6 mm 10 mm and 12 mm
Bevel ground at a 25 degree bevel.
Handles made from stained European Beechwood
This 3 piece set of mortise chisels is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades takes and holds an excellent edge. The blades are accurately ground. As with all edge tools, they will require some sharpening before use. These mortise chisels are an excellent value for a good quality tool. This is a set of 3 mortise chisels. It contains a 6 mm (1/4"), 10 mm (3/8") and 12 mm (1/2") chisels. The blades are 5 7/8" long and are ground at a 25 degree bevel. The blade widths taper .030" from tip to shoulder for sidewall clearance. Thickness of the blades taper from 3/8" at the tip to 1/2" at the shoulder. Handles are stained Beech and are 6 1/8” long and 1 1/2" in diameter for a good firm grip. The blades have a well-seated heavy steel tang and the handles have 2 steel ferrules to withstand heavy plows from a mallet. Overall lengths are 12". Comes in retail packaging only.
Narex Czech Steel 3 piece set 6 mm 10 mm and 12 mm Mortise Chisels by Narex B01MU1VEJY